Jx-v29 59-ga V1.6 Firmware 'link' Today

Use a 4GB or 8GB USB flash drive formatted to FAT32 .

V1.6 resets the active low/high polarity for step/direction pins to default. Solution: Reconfigure the “Ports and Pins” settings in your control software. Invert the Step or Dir signals for the affected axis. Jx-v29 59-ga V1.6 Firmware

: Allows for direct playback of media (photos, videos) from a USB drive. Resolution Support Use a 4GB or 8GB USB flash drive formatted to FAT32

Most boards require pressing a "BOOT0" button while resetting. Refer to your manual—common steps: hold BOOT0, press RESET, release RESET, then release BOOT0. then release BOOT0.