Schindler 5500 Error Codes Exclusive Jun 2026

While full technician manuals are proprietary, frequent issues reported by maintenance professionals technical guides typically fall into these "chapters": 700 Series (Operational Blocks):

Troubleshooting Schindler Miconic TX and TX-GC | PDF - Scribd schindler 5500 error codes

| Code | Description | |------|-------------| | 101 | Safety chain open (door locks or emergency stop) | | 102 | Final limit switch activated | | 103 | Car overspeed governor tripped | | 104 | Buffer switch activated | | 201 | Drive system not ready | | 202 | Inverter fault – DC link ripple too high | | 203 | Motor current imbalance | | 301 | Door open time expired | | 302 | Door close obstruction (re-opened 3x) | | 303 | Door lock circuit short to ground | | 401 | Position reference lost – need re-leveling | | 402 | Floor count mismatch – flyer correction required | | 501 | Group controller communication lost | | 502 | CAN bus error (between cars) | While full technician manuals are proprietary

: Trip timeout; the car did not reach the desired floor within the maximum allowed time. schindler 5500 error codes