To configure the module, you must set specific limit values based on your battery type (e.g., 12V, 24V, or 48V systems). Description Range / Notes Upper Limit Voltage Relay disconnects (Charging) or connects (Discharging). dn Lower Limit Voltage Relay connects (Charging) or disconnects (Discharging). OP Conduction Time Set a specific duration for the relay to remain closed. dOP Delay Start Time Set a delay (0–999s) before the relay activates. FOP Forced Start Time

Short press to toggle the relay ON/OFF (emergency stop). Long press to set the LCD backlight behavior (L-P). RoboFactory 2. Setting Parameters Enter Setup: Long press Select Parameter: Short press to cycle through: : Upper limit voltage. : Lower limit voltage. : Conduction/Working time. : Delay on time (0–999 seconds). : Forced on time (Discharge mode only). Adjust Values: buttons to increase/decrease values. Save & Exit: Long press for 5 seconds. Working Logic XY-CD60 Solar Battery Charger Controller Module User Manual

: The screen shows current voltage, and you can toggle to see the percentage or time by short-pressing SET . XY-CD60 Charging and Discharging Manual | PDF - Scribd

One rainy evening, Elara sat down to master its dual nature, flipping through the manual to understand its two distinct souls: Charging Mode (P-1) Discharging Mode (P-2) The Vigilant Guardian

Flip your XYCD60 device over. Look for an sticker (e.g., 2A2ZR-XYCD60 ). Then:

If you own an head unit (common in aftermarket car radios), the manufacturer rarely provides a paper manual. Instead, the manual is usually pre-loaded on the device itself or available through specific channels.

If you have any more information about the Xycd60, such as the manufacturer or model number, I may be able to help you find the manual more easily."

XY-CD60 Solar Battery Charge Controller Module - RoboFactory