Etop | Miniscan Driver Vs890

If you have recently acquired this device or are facing connectivity issues, you have landed on the right page. This comprehensive article covers everything you need to know about the VS890 driver—from installation and compatibility to advanced troubleshooting.

) is a robust OBD2 diagnostic scanner used to read and clear vehicle fault codes across more than 70 manufacturers. etop miniscan driver vs890

The VS890 can often be configured by scanning special barcodes from its manual. Common ones: If you have recently acquired this device or

Once installed, the device should appear as a USB Serial Port (COM#) . Take note of the COM port number, as you'll need it for the Vgate update software. 💡 Troubleshooting Tips The VS890 can often be configured by scanning

| Source Type | Link / Action | Notes | |-------------|---------------|-------| | | Search Etop official support | Etop often uses resellers; check your vendor’s site. | | Generic USB HID driver | Built into Windows/macOS/Linux | Works for basic barcode input (as keyboard). | | Silicon Labs CP210x / Prolific PL2303 (for RS232-USB models) | Silicon Labs or Prolific | Needed if scanner shows as COM port. | | Etop VS890 specific driver (rare) | Contact seller or request via support email | For advanced configuration software. |