G41t-ad V1.0 Motherboard | Manual Best
ECS G41T-AD V1.0 is a Micro-ATX motherboard (DTX form factor) designed for the Intel LGA775 socket. It was commonly used in OEM systems like the Acer Aspire X1900 eMachines EL1850/EL1852G The Retro Web Technical Specifications The following specifications are based on the ECS G41T-AD Retro Web archive Specification CPU Socket
| Feature | Specification | | :--- | :--- | | | Micro-ATX (24.4 cm x 21.0 cm) | | Chipset | Intel G41 + ICH7 Southbridge | | CPU Socket | LGA 775 | | Supported CPUs | Intel Core 2 Quad, Core 2 Duo, Pentium Dual-Core, Celeron (FSB 800/1066/1333 MHz) – 45nm and 65nm | | Memory | 2 x DDR3 DIMM slots (dual-channel) – Max 8GB DDR3-800/1066 (1333 OC) Note: 4GB per slot only with high-density modules, but chipset max is 4GB officially | | Integrated Graphics | Intel GMA X4500 (VGA output only) | | Expansion Slots | 1 x PCIe x16 (v1.1), 1 x PCIe x1, 2 x PCI | | Storage | 4 x SATA 2.0 (3Gb/s), 1 x Ultra ATA 100 (IDE) | | Audio | Realtek ALC662 (5.1 channel HD audio) | | LAN | Realtek RTL8102E / RTL8111C (10/100/1000 Mbps) | | Rear I/O | PS/2 Keyboard, PS/2 Mouse, VGA, 4 x USB 2.0, LAN, 3 x Audio jacks | | Internal Headers | 2 x USB 2.0 (2 ports each), Front Audio, COM port, Chassis Intrusion | g41t-ad v1.0 motherboard manual
(Wolfdale/Yorkfield variants, often requires BIOS mods) Expansion and Connectivity ECS G41T-AD - The Retro Web ECS G41T-AD V1
) is a legacy LGA775 board. While a single standalone "G41T-AD" PDF is rare, it is identical in architecture and pinout to the ECS G41T-M Memory4Less.com Core Specifications CPU Socket: Intel LGA 775 (Socket T). Supported Processors: If you are testing the board outside a
The G41T-AD is an entry-level motherboard typically based on the Intel G41 Express Chipset. It was often found in pre-built systems from manufacturers like Gateway, eMachines, or Packard Bell. It is an LGA 775 socket board, meaning it houses the legendary Intel Core 2 Duo and Quad processors.
If you are testing the board outside a case and don't have a manual for the switch pins, you can "jump" the power pins (pins 6 and 8) briefly with a screwdriver to force a boot .