Bonavita Hudson Ii Lifestyle Crib Instructions 【TRUSTED】

Assembly of the Bonavita Hudson II Lifestyle Crib requires a Phillips head screwdriver and an Allen wrench, focusing on securing the stabilizer bar and adjusting the mattress support height. Conversion to a toddler or day bed involves removing the front rail and utilizing the required stabilizer bar for structural integrity. For complete assembly instructions, consult the document available at Bed Bath & Beyond . Crib (1921) - Assembly and Operation Manual

: Insert Allen bolts (typically 2-inch) through the inside edge of the crib sides and into the footboard. Tighten all fasteners securely with an Allen wrench. Final Inspection : Check all slats to ensure the spacing is no wider than 2 3/8 inches (6 cm) and verify there is no splintering or peeling paint. cdn.prod.website-files.com Required Tools & Hardware Allen Wrench : Usually included; often 5/32. Phillips Head Screwdriver : Required for mattress support screws and stabilizer bar. Avoid Power Tools bonavita hudson ii lifestyle crib instructions

By taking the time to carefully read and understand the Bonavita Hudson II Lifestyle Crib instructions, you'll be able to provide a safe and comfortable sleeping environment for your child, giving you peace of mind and helping your little one thrive. Assembly of the Bonavita Hudson II Lifestyle Crib

Gap between mattress and crib sides must be less than two fingers (1 inch/2.5 cm). Crib (1921) - Assembly and Operation Manual :

Never use power drills or drivers, as they can strip the wood and hardware. Safety Check: