Makerbase Mks Dlc V21 Manual Link Jun 2026

Use the $I command in the console to check your current firmware version and $$ to view/edit your machine parameters (steps per mm, max speed, etc.).

The DLC v2.1 is an "all-in-one" board designed to run GRBL. It supports 3-axis control (X, Y, and Z) and features specific ports for laser TTL control and CNC spindles. Key Specifications ATMega328P (8-bit) Input Voltage: 12V to 24V DC Supported Drivers: A4988, DRV8825, TMC2208, TMC2209 Interface: USB for PC connection 🔌 Setup and Wiring Guide makerbase mks dlc v21 manual link

: Connect the MKS DLC V21 to your machine (3D printer or CNC). This usually involves connecting it to the control board via a communication interface (like UART or USB) and ensuring it's properly powered. Use the $I command in the console to

| Feature | Specification | |---------|----------------| | | STM32F407VGT6 (ARM Cortex-M4, 168MHz, 1MB Flash) | | Stepper Drivers | 4x TMC2209 (UART mode, up to 2A RMS) | | Heater Channels | 2 (Hotend + Heated Bed) | | Thermistor Ports | 3 (TH0, TH1, TH2) | | Max Input Voltage | 12V – 24V DC (recommended 24V for performance) | | Cooling Fan Ports | 3 (Controllable: HE, part cooling, controller fan) | | Probe Port | Dedicated 5V/24V probe (BLTouch/inductive) | | Display Support | MKS Mini12864 V3 / RepRapDiscount Smart Controller (EXP1+EXP2) | | Connectivity | Micro USB (Serial), UART, CAN bus (for future expansion) | Key Specifications ATMega328P (8-bit) Input Voltage: 12V to