| Feature | E3D 3.1 Performance | Comment | |---------|---------------------|---------| | | Excellent | Supports rule-based, tolerance-driven clashes. | | Spec-driven routing | Very Good | Catalog is robust; auto-routing works for simple runs. | | Bulk MTO | Excellent | Can generate multi-discipline reports in minutes. | | Ventilation (HVAC) design | Good | But less intuitive than dedicated HVAC tools. | | Cable tray routing | Fair | No automatic fill calculation; manual only. | | Review in 3D PDF | None | Requires third-party exporter. |
According to data from AVEVA , teams using E3D Design 3.1 can achieve significant efficiency gains: delivery of engineering drawings. 15% reduction in total modeling time. 30% reduction in overall design time for EPC firms. Core Modules aveva e3d 3.1
The sun hadn't yet risen over the port, but at , the workstation monitors were already glowing with the sharp, blue interface of AVEVA E3D Design 3.1 . | Feature | E3D 3
1. Setup → Create Project, Users, Databases (Admin) 2. Specs → Define piping/structural specs (Paragon) 3. Equipment → Place major equipment (Equipment Modeling) 4. Structure → Model steel/concrete (Structural Design) 5. Piping/HVAC → Route main services (Piping Design) 6. Cable Tray → Run cable management (Cable Tray Design) 7. Clash Check → Run interference detection (Clash Manager) 8. Drawing → Extract GAs, Isometrics, Sections (Draft/IsoDraft) 9. Export → IFC, DXF, STL, or to laser scanning review | | Ventilation (HVAC) design | Good |