Air Precision Elt 96 Maintenance Manual Jun 2026

Ensure the unit is switched to "OFF" before opening.

| Pin | Signal | Function | Wire Color | | :--- | :--- | :--- | :--- | | 1 | GND | Ground | Black | | 2 | ARM_SW | Remote arm (low = armed) | Yellow | | 3 | GPS_RXD | RS-232 input from GPS | Green | | 4 | LAMP | Panel test lamp driver | Blue | | 5 | +28V | External power (optional) | Red | | 6 | N/C | Not connected | - | | 7 | G-SW_OUT | G-switch status (to FDR) | Orange | | 8 | RSV | Reserved | - | | 9 | SHIELD | Chassis ground | Bare | Air Precision Elt 96 Maintenance Manual

Marc closed the manual and stamped the maintenance log. He knew that if this aircraft ever went down, this small orange box would transmit for at least 48 hours at 5 watts, giving rescue teams the precise coordinates they needed. used for the ELT 96 or the specific G-switch settings for different aircraft types? CMM Elt96 Elt97 256102 - A21f047901071006 | PDF - Scribd Ensure the unit is switched to "OFF" before opening

Try searching with potential typos:

Press the "AUTOTEST/RESET" button on the remote control. A successful test is typically indicated by the "XMIT ALERT" light flashing for 2 seconds and then extinguishing. used for the ELT 96 or the specific