Error | Fanuc 414 Servo Alarm Z Axis Detect
The most common cause of a detection error is a failure in the feedback loop. The servo motor is equipped with an encoder (a pulse coder) that reports the rotor's position back to the main board.
at:
The following are some common causes of the Fanuc 414 servo alarm Z-axis detect error: fanuc 414 servo alarm z axis detect error
The "detect error" is a symptom. The cause lies in one of four domains: The most common cause of a detection error
Fanuc 414 Servo Alarm signals a digital servo system fault on a specific axis—in your case, the fanuc 414 servo alarm z axis detect error
Disconnect the motor power cable from the drive and check the motor for shorts to the frame. 💡 Pro Tips for Prevention
