Hilger Watts Theodolite Manual Repack !!exclusive!!

Once the theodolite is placed on the base plate of the case, engage the locking clips. If your model uses a threaded center screw to hold the base, ensure it is snug but not overtightened. The goal is to prevent lateral shifting while allowing the rubber mounts to absorb vertical vibrations.

Perform a series of test measurements to ensure the theodolite is functioning accurately and smoothly. hilger watts theodolite manual repack

: Submerge metal components (screws, bearings, bushings) in a bath of isopropyl alcohol to dissolve old, hardened grease. Use a soft brush to clear threads. Once the theodolite is placed on the base