If you need help interpreting a specific error code or setting after locating the manual, reply with the code or menu screenshot description.
Before delving into the manual’s contents, one must understand the unique design of the CWFL-6000. Unlike standard chillers, it features two independent water circulation systems. The cools the laser head itself, ensuring precise beam stability. The high-temperature circuit cools the laser’s optics, such as the QBH connector (the fiber cable interface), maintaining them above the dew point to prevent internal condensation. The manual’s introductory chapter is vital because mixing these circuits or setting incorrect temperatures will lead to catastrophic laser failure. The manual explicitly warns users never to swap the water inlets/outlets and clearly labels each circuit’s target temperature range (typically 20-35°C for low and 25-40°C for high).
The manual emphasizes: . A typical setting: T1 = 23°C, T2 = 30°C.
The water remains at a fixed temperature set by the user. Common Key Combinations: To change set points: Press and hold "SET" and "▲" keys.
Allow at least 50cm of clearance at the back (air outlet) and 30cm on the side (air inlet) to ensure proper airflow.
on startup, your 3-phase wiring order is incorrect and needs adjustment. Air Purge:
If you need help interpreting a specific error code or setting after locating the manual, reply with the code or menu screenshot description.
Before delving into the manual’s contents, one must understand the unique design of the CWFL-6000. Unlike standard chillers, it features two independent water circulation systems. The cools the laser head itself, ensuring precise beam stability. The high-temperature circuit cools the laser’s optics, such as the QBH connector (the fiber cable interface), maintaining them above the dew point to prevent internal condensation. The manual’s introductory chapter is vital because mixing these circuits or setting incorrect temperatures will lead to catastrophic laser failure. The manual explicitly warns users never to swap the water inlets/outlets and clearly labels each circuit’s target temperature range (typically 20-35°C for low and 25-40°C for high).
The manual emphasizes: . A typical setting: T1 = 23°C, T2 = 30°C.
The water remains at a fixed temperature set by the user. Common Key Combinations: To change set points: Press and hold "SET" and "▲" keys.
Allow at least 50cm of clearance at the back (air outlet) and 30cm on the side (air inlet) to ensure proper airflow.
on startup, your 3-phase wiring order is incorrect and needs adjustment. Air Purge:
Cellebrite UFED4PC 7.68.0.809 KeyGen
| Date | 2023-12-19 18:55:21 |
| Filesize | 1.18 MB |
| Visits | 1752 |
| Downloads | 62 |