Sometimes you must switch to a different drum, remove the master disposal box, and power the machine off and on to fully clear the error state.
If cleaning and adjustment fail, physically inspect the (located on the main drive shaft) and the PF Motor encoder .
Clean the light absorber strip with a lint-free cloth. If you recently replaced your screen, double-check that the cloth isn't covering the sensor's path.
Since you asked to "come up with a post," here are three options tailored for different platforms:
Turn the machine off, wait a few seconds, then turn it back on. Holding the button while powering on can sometimes clear persistent codes. 5 Test Mode Adj.
Sometimes you must switch to a different drum, remove the master disposal box, and power the machine off and on to fully clear the error state.
If cleaning and adjustment fail, physically inspect the (located on the main drive shaft) and the PF Motor encoder .
Clean the light absorber strip with a lint-free cloth. If you recently replaced your screen, double-check that the cloth isn't covering the sensor's path.
Since you asked to "come up with a post," here are three options tailored for different platforms:
Turn the machine off, wait a few seconds, then turn it back on. Holding the button while powering on can sometimes clear persistent codes. 5 Test Mode Adj.