Proteus Library: Voltage Sensor

Let’s look at a practical example of measuring a 12V battery using an Arduino in Proteus.

| Component | Proteus Library Reference | |-----------|---------------------------| | Resistor 10k | RESISTOR (10k) | | Resistor 5.6k | RESISTOR (5.6k) | | DC Voltage Source | DC BATTERY or VSINE | | Microcontroller (e.g., Arduino) | ARDUINO UNO R3 | | Virtual Terminal (for display) | VIRTUAL TERMINAL | | Ground | GROUND |

Proteus has generic voltage probes and meters: voltage sensor proteus library

The Voltage Sensor library in Proteus provides a range of voltage sensor models that can be used to simulate and analyze voltage sensing circuits. These models can be used to design and test voltage monitoring systems, overvoltage/undervoltage protection circuits, and other applications where voltage sensing is critical.

// Variables float sensorValue = 0; float voltage = 0; Let’s look at a practical example of measuring

: Click on the Probe Mode icon (a small yellow point). Place a Voltage Probe directly on any wire or node to see the real-time voltage displayed during simulation. 2. Installing a Specific Voltage Sensor Module Library

Navigate to the Proteus installation folder (typically C:\Program Files (x86)\Labcenter Electronics\Proteus X Professional\LIBRARY ). // Variables float sensorValue = 0; float voltage

Since many specific sensors are not in the default Proteus 7 or 8 installations, you must manually add them: