Staples 17466 Laminator Manual -

: In some instances, it can get very hot to the touch or emit a strong initial plastic odor. Staples.com Reference Manual & Setup For detailed operating steps, you can refer to the official Staples Instructions PDF Instructions-1171104.pdf - Staples Brand Portal

Since Staples often discontinues older personal laminators, the physical manual is easily lost. Here is where to find it legally and reliably: staples 17466 laminator manual

| Problem | Likely Cause | Solution (from manual) | | :--- | :--- | :--- | | | Machine not fully warm | Wait 2 more minutes; red light must be steady. | | Pouch jams halfway | Pouch too thick (>5 mil) | Turn off unit. Pull pouch gently straight back. Use 3 mil pouch. | | Lamination has bubbles | Inserted sealed edge first | Next time, insert open edge first. Re-laminate with carrier. | | Ready light blinks | Overheating protection | Turn off for 15 minutes to cool. | | Rollers spin but no feed | Slippery pouch surface | Use provided carrier (cardstock folder). | : In some instances, it can get very

: Wait for the "Ready" indicator. This usually involves a blinking light (typically green or blue) turning solid, or a beep sounding once the rollers reach the correct temperature. Insert Document | | Pouch jams halfway | Pouch too