Rm1-2316 Schematic ((hot))

Look at the PCB from which the module was removed. Trace the copper lines. Ground pins connect to a large ground plane. The input pin will have a thin trace coming from a previous stage (maybe a mixer or pre-driver). The output pin will lead to a final filter or antenna port.

While we cannot provide an OEM-controlled schematic, we can construct a for a typical hybrid RF amplifier that would carry the Rm1-2316 designation. Rm1-2316 Schematic

Once you understand the schematic (even a reverse-engineered version), you can build a substitute. For example, if the Rm1-2316 is a 15dB gain block for 50-500 MHz: Look at the PCB from which the module was removed